olysh.com  展元

扭力扳手|推拉力計|硬度計 經營產品 : 扭力板手,扭力起子,扭力試驗機,推拉力計,張力計,硬度計,膜厚計,立體顯微鏡,扭矩扳手,氣動起子,電動起子,手提式硬度機,勃氏硬度計,扭力扳手
 進階查詢
| 首頁
| 公司簡介
|硬度扭力技術服務中心
|相關連結
CEDAR DIW 120/75/20/15 電子式扭力扳手 首頁 > 扭力工具 > 扭力板手 > 電子式扭力扳手 >
 



商品需求單
CEDAR DIW 120/75/20/15 電子式扭力扳手 [ 熱 ]
新增網頁1
Screw tightening control
● DIGITAL TORQUE WRENCH  DIW-120/75/20/15
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one by one like former.


 
*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed 
*Available in: lb-in, kg-cm and N-m 
*Peak, Real Time and Peak Down measuring mode (selectable)
*800 data memory.
*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing 
*Programmable screw tightening counter
*Programmable Auto Zero function resets unit to zero for easy operation
*Both CW and CCW operation
*ASCII format output(USB)
*Runs on internal Ni-MH batteries (for 12 hours) Auto shut-off after 10 min. of non-use
* AC charger and carrying case included.

NEW DEVELOPMENT
Wrench head awivels 300°



 
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N・m
(at the time of Track)
0.20 - 15 N・m 0.20 - 20 N・m 0.20 - 75 N・m 2.0 - 120 N・m
2.0∼150 kgf・cm 2.0∼200 kgf・cm 2.0∼750 kgf・cm 20∼1200 kgf・cm
2.0∼130 lbf・in 2.0∼174 lbf・in 2.0∼650 lbf・in 20∼1040 lbf・in
Accuracy ±0.5% 
(199 or less digit±1digit) 
±0.5% 
(499 or less digit±3digit)
±0.5% 
 (199 or less digit±1digit)
Display The 4 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measuring 
mode
P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value ( Used for Zero-Adjustment )
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision 
function
Setting of torque value Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum, and the average value The data number, the maximum, the minimum value, and the average value of memory data are displayed.
Data spec. Data transfer ASCII format (Baud rate : 19200)
Data memory 800 data
A setup of the number of counts One to 99 count   (count in a direction with a bundle)
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size φ34(grip)×236(L) φ34(grip)×235(L) φ34(grip)×320(L) φ34(grip)×445(L)
Weight (about) 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment One-way socket
Accessories
 (one piece each)
AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure
型號 : DIW品牌 : CEDAR
製造商 : CEDAR
加入好友

展元LINE@線上客服

展元貿易有限公司
地址:新北市三重區興德路123-9號7樓 郵遞區號 : 24158 地圖
TEL:02-8512 3459 FAX:02-8512 3470 E-mail: tw@oly.com.tw

上海基高貿易有限公司
地址:上海市長寧區遵義南路8號8C郵編 : 200336
諮詢熱線: 021-6540 0620 021-6540 4998
林世範135-01761419 ;1811-5102339

FAX:021-6192 4312 E-mail: 1204744606@qq.com