新增網頁1
| Management of electric screw driver |
|
●Torque Meter DI-9M-8/08 |
DI-9 series
is most suitable for checking and controlling the torque of
Electric Screwdriver and Torque Driver.
|
|
Yes-no decision conditions etc. can save five
channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one
by one like former. |
 |
|
The best for everyday check of an electric driver
Wide measurement range (0 - 8000digit)
Can measure without inversion Rolling-back work efficiently by OW joint
(PAT.P).
Change of Measurement Unit Can be Performed
Data Output is USB Form (B Type).
Memory Data are 800 Affairs
Real-time Output is Every 1 / 180 Seconds. |
|
|
Specification |
DI-9M-8 |
DI-9M-08 |
|
Measuring range |
0.020-8 N･m |
2.0-800 mN･m |
|
0.20∼80 kgf・cm |
0.020∼8 kgf・cm |
|
0.20∼70 lbf・in |
0.020∼7 lbf・in |
|
Accuracy |
±0.5% (499
digit or less ±3digit) |
|
Display |
The 4 figures digital display of LCD |
|
The measurement direction |
CW-CCW (right and left) |
|
Zero return by one touch |
Return to zero by pressing clear button. |
|
Measurement Mode |
Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) |
|
High and low limits
judging function |
High and
low value are measurement within the limits, and can be set up. |
|
Real-time Output |
Load
torque value is outputted every about1/ 180 second. |
|
The Maximum, the minimum, and the average value display |
The maximum, the minimum value, and average value
of the saved data |
|
Data Output |
ASCII format (baud rate 19200) |
|
Auto power save |
10 minutes no use, automatically switch
off. |
|
Power supply |
Ni-Cd chargeable battery 1.2V × 5cells
700mAh |
|
Charging time |
About 3hours |
|
Continuous working time |
About 12hours |
|
clearance |
It is a display clearance in set-up time. (0.1
- 3.0 sec) |
|
Socket size |
□ 20mm/ □9.5mm |
|
Dimension / Weight |
W:160×D:125×H:55 / About 1kg |
|
Recommend buffer accessories |
Measuring joint
OW-20/OW-60 |
Measuring joint
OW-025/OW-10 |
Cube (with a 5th page screw hole) 20x20x20
(M2.6/M3/M4/M5/M6 Tap processing) |
|
AC/DC adaptor |
|
Carrying case |
|
An inspection report, a proofreading certificate, a traceability system
figure |
※Do not use for measurement
of impact tool.Do not apply more than the specified torque.
| ●
MEASURING JOINT OW series |
 |
Since
our company developed the buffer
with little influence of fricative,
stable measurement could be performed
Moreover ,it does not need to reverse-rotate
at the time of measurement,
and work efficiency improved. |
|
Specification |
Type |
|
OW-025 |
OW-10 |
OW-20 |
OW-60 |
|
Measuring range N･m |
0.25 |
1 |
2 |
6 |
|
Mechanical life （times） |
10,000 |
8,000 |
5,000 |
5,000 |
Outer
diameter
size
（mm） |
Bit
engagement
part
(screw part) |
M2.6 cross
recess screw |
M3 cross
recess screw |
M4 cross
recess screw |
M6 cross
recess screw |
The standard screw is cross recess screw
but they may be altered as necessary |
| Outside diameter |
φ28 |
φ32 |
φ32 |
φ38 |
| Height |
44 |
51 |
51 |
69 |
| Ｉnstallation |
20square ×4(t) |
| 
